McIntosh MA6800 - 2ndHand
Art.Nr.: E113006
McIntosh MA6800 Vintage Vollverstärker, neuwertiger Zustand mit OVP
Analoger Aufbau, einer der letzten welcher so gebaut wurde.
| Form | Stereo integrated amplifier |
| Output power (at the time of both channel operation) | 150W+150W (2ohm, 4ohm, 8ohm, sinusoidal consecutive output) |
| Load impedance | 2ohm, 4ohm, 8ohm (independent termination) |
| Output frequency bandwidth | 20Hz - 20kHz |
| THD | 0.005% or less (at the time of 20Hz - 20kHz, 250mW-150W, and both channel operation) |
| Cross modulation distortion (both channel operation) | 0.005% or less (at the time of the arbitrary combination of 20Hz - 20kHz 250mW-150W) |
| Frequency characteristic | 20Hz-20kHz+0 -0.5 dB |
| SN ratio (IHF-A network) | Power amplifier: 110dB (Output power) Preamplifier: 90dB (a 10mV input, 84dB IHF) High-level: 100dB (an Output power, 90dB IHF) |
| IHF dynamic head room | 1.8dB |
| Dumping factor | 40 or more |
| Power guarding | In 1kHz, it is less than THD 2% to over-drive 14dB. |
| Input impedance | Phono: 47kohm (65pF) High SFT Level: 22kohm Power Amplifier in: 20kohm |
| Input sensitivity | Phono: 2.5mV (at the time of an Output power 0.5mV IHF) High SFT Level: 250mV (at the time of an Output power 40mV IHF) Power Amplifier in: 1.4V (at the time of an Output power) |
| Maximum input level | Phono:90mV High Level:10V |
| Tone control | Bass/Treble -- an a maximum of 12dB boost /12dB -- it cuts |
| Power source | AC100V, 50Hz/60 Hz, 6.25A (Underwriters Laboratories/CSA1) |
| Dimensions | Width 445x height 179x depth of 537mm (knob included) |
| Weight | 31.8kg |
Preis:
